Jasco Enbrighten Bistro GE014-OPP-5.4W Manual De Instrucciones

Warm White 2200K
Congratulations on your recent purchase of the Enbrighten Bistro Lights. Enbrighten Bistro Lights are designed
to provide lighting for life with no bulbs to replace ever again! Purchase additional lights to form one continuous
string up to 750 feet!
IMPORTANT: Before installation, please read all the warning statements included on the reverse side of these instructions.
In order to ensure proper installation, please follow each step below:
Step 1 - INITIAL SETUP
1 - Carefully unpack Bistro Lights from box. Remove the wire ties (see warning on reverse side).
2 - When installing Bistro Lights outside, a Ground Fault Circuit Interrupter (GFCI) receptacle must be used. Before installing, plug the Bistro
Lights into the GFCI receptacle to ensure all lights work properly. IMPORTANT: Unplug the Bistro Lights prior to mounting.
Step 2 - INSTALLING BISTRO LIGHTS
1 - IMPORTANT: Only mount Bistro Lights to solid support structures such as joists, beams, studs or
other solid mounting surfaces.
2 - Each Bistro Light is designed with a universal keyhole for mounting with lights hanging downward.
Hardware options include screws, nails, zip ties, hooks and more (not included).
3 - Guide wires in compliance with local electrical and building codes must also be used to support the
Bistro Lights.
4 - Once appropriate GFCI outlet location, mounting surface and hardware are determined, mount your
Bistro Lights.
5 - Once you have mounted the Bistro Lights, connect the male plug into the GFCI receptacle and
place the female receptacle cover firmly over the unused outlet.
Step 3 - INSTALLING MULTIPLE BISTRO LIGHT SETS
Extend the length of your lights by connecting more than one strand together to
form one continuous string up to 750 feet! Simply follow the above installation
steps, making sure each connection between strands is secure. Once installation
is complete, place the female receptacle cover firmly over the unused outlet.
Step 4 - REMOVING BISTRO LIGHTS
1 - Always unplug Bistro Lights from their receptacle prior to removal.
2 - Carefully remove each light individually from the mounting hardware.
NOTE: For your safety, never pull or jerk lights from mounting hardware.
3 - Store lights in a dry location.
SAVE THESE INSTRUCTIONS
Bistro
Available in multiple lengths at www.byjasco.com
Length, feet
12
24
48
See reverse side for electrical rating
Version 1
5/2/19
Bulbs Model Number
6 38353
12 38356
24 38357