Overmax Multipic 3.5 Manual De Usuario página 15

2. Switching on and off
To switch the projector on or off , set active position (-) of the power key at
the back of the housing. Press on/off key on the remote control or projector.
3. Sharpness and screen angle adjustment
Place the projector in a way that the lens is perpendicular to the wall or
board on which the image is to be displayed. Once the device has been
switched on, the main menu will be displayed:
4. Language change
a) Use directional keys on the remote control to select sections (Settings) and
confi rm with (OK) key on the remote.
To increase sharpness of the image, turn the sharpness
knob (3) located behind the lens so that the image
gets sharper.
If the image is not displayed perpendicularly, it will be
distorted.
Distorted image in the shape of the trapezoid (see
fi gure below) can be adjusted with the use of a knob (2).
EN