NAD HTRM Manual De Instrucciones página 9

HTRM FEATURES
BATTERY
Instead of waiting until the "Low Batt" warning is displayed, you
can check the current battery level using this option. This option
will show a bar graph representing the current battery level. When
the batteries are new, the bar graph will show 8 bars, Once the
bar graph reaches close to zero, the "Low Batt" warning will start
to show.
BACK LIGHT SENSITIVITY (B LIGHT)
The backlight timeout can be set from 0 - 20 seconds. This is the
length of time the backlight stays on after releasing the last key.
The following backlight modes are available:
• Off - The backlight will never come on.
• Sense - The backlight will only come on if the light sensor
detects low light conditions.
• On - The backlight will come on any time a key is pressed.
• Sense Level - The point where the back light comes on in a
darkened room
LIBRARY
This function allows you to set all the function keys for a device to
the functions stored in the included library tables.
LEARN
This function allows you to learn IR commands from another
remote. To learn a function into a DEVICE SELECTOR key press
the desired DEVICE SELECTOR key momentarily and then press
and hold the same key for more than two seconds.
PUNCH THROUGH
There are two types of punch through functions.
The first type allows a function key to punch through to another
device. For example, by default, the volume keys for the DVD
device punch through to AMP.
The second type allows you to punch through to a stored macro.
This provides a way to execute a macro with a single keys press.
If a macro step includes a key which has a punch through to
another macro, the punch through is not used. This is to prevent
circular macros that would never end. Instead of the punch
through, the underlying function of the key will be used when the
macro is executed. This allows you set a single key press macro for
a key without losing the original functionality of that key.
example; you could record a macro which includes AMP power
on, TV power on and DVD power on and then have the AMP
power on button activate this macro.
COPY
This function allows you to copy functions from one key to
another. If you want to select a DEVICE SELECTOR key for either
the "From?" or "To?" you must press and hold the key for two
seconds. Just pressing the key momentarily will only change the
active device.
DELETE
Each key can have several functions types stored. However, only
the highest priority type will be active. When you delete a
function, a lower priority function type may become active. To
completely erase the functionality of a key, you may need to
execute the Delete function multiple times.
For example; if you delete a learned command, a lower priority
command may become active.
The order of priority for each function type are:
• Punch Through
• Learned
• Copied Library Command
• Default Library Command
For
9