Setting The Clock - Lagrange Cafetière Manual De Instrucciones

SETTING THE CLOCK

Power up the appliance by connecting the power plug. You will
*
hear a «beep», and the display will light up in blue showing a
flashing « ».
00 00
Press the ON/OFF button to operate the appliance. The «
*
display stops flashing.
Press the «h» or « MIN » button to enter the time-setting mode.
*
The display will show a flashing «
Press the «h» or « MIN » button to set the clock. To move forward
*
fast, keep the «h» or « MIN » button depressed.
Now press the ON/OFF button to start coffee preparation.
*
The appliance will emit a beep-beep sound and the
be displayed.
Note: By default, without setting the clock in advance, the display
will show « ».
00 00
SETTING DELAYED BREWING
After setting the clock, you can programme your delayed brewing
*
start. Please note that the «Delayed start» feature cannot be
activated if the clock time has not been set.
To proceed, press the «Prog» button. The display will show «
*
and a flashing icon will appear.
Select the time when you want your coffee maker to start brewing.
*
After a few seconds, the display will show the current time and a
*
clock icon indicating that a delayed start has been programmed.
When the delayed start is activated, the appliance beeps twice,
*
the display lights up, the
is displayed.
00 00
00 : 00 ».
icon will
:
00 00
icon disappears and the icon
UPKEEP
When cleaning the appliance, always make sure to disconnect the
*
power plug. Allow the appliance to cool before washing it. Do not
place the base, the cord or the plug into water.
»
Clean the coffee maker and the base using a damp cloth. If the
*
coffee maker is particularly dirty, a small amount of detergent
may be added.
Do not use scouring pads, steel wool or any type of strong solvents
*
or abrasive cleaning agents to clean the appliance. They may
damage its external surfaces.
Remove the carafe, the filter holder and the permanent filter,
*
and clean them in water to which dishwashing liquid was added.
Rinse and dry thoroughly.
These parts can also be cleaned in a dishwasher.
*
IMPORTANT! Allow the appliance to dry completely after cleaning
*
and before reusing it. Do not use the appliance if the base or the
underside of the appliance is wet.
Make sure that the appliance is clean and dry before storing it.
*
»
47 47
E N G