Description Of The Appliance; Use; Automatic Shutdown; Cleaning - Imetec G0002 Instrucciones De Uso

1. Inner lining
2. Outer lining
3. Control
Use the footwarmer while sitting down.
SPECIFIC WARNINGS:
Do not use the product with your shoes on.
Do not use to keep animals warm.
Do not use if it shows signs of damage.
SWITCHING THE APPLIANCE ON AND SELECTING THE TEMPERATURE
• Press the ON/OFF
• The temperature display (4) will light up and the temperature will be automatically set to
position 5 (MAX).
• Select the desired temperature, from 1 (min.) to 5 (max.) by pressing the temperature
selector (6) until the relative number lights up on the temperature display (4).

AUTOMATIC SHUTDOWN

• The footwarmer is provided with an automatic shutdown system. The stand-by display
lights up after 3 operating hours to indicate that the product has switched off automatically.
• Switch the appliance back on by pressing the ON/OFF selector (7) and select the desired
temperature once again.
SWITCH-OFF
• Switch the footwarmer off after use by pressing the ON/OFF selector (7).
• Remove the plug from the socket.
ATTENTION! Always disconnect the electric plug before cleaning.

CLEANING THE INNER LINING (1) (FIG.A)

The footwarmer is provided with an inner lining (1) which can be washed in lukewarm water
(40°) after it has been pulled out of the outer lining (2). We recommend using delicate
detergent.
Wash at 40°C.
Tumble-dry at less
than 40°C.
Do not dry-clean.

DESCRIPTION OF THE APPLIANCE

4. Temperature display
5. Stand-by Display
6. Temperature selector
(7) selector to switch the footwarmer.

CLEANING

USE

Do not bleach.
Do not iron.
7. ON/OFF selector
GB
(5)
7