Symbols On The Device; Protective Clothing; Description Of The Device - Kärcher CS 400/36 Battery Manual De Instrucciones

The proper function of the chain brake must be checked
before each use of the device (see chapter Checking
the functionality of the chain brake).

Symbols on the device

General warning symbol
Read the operating instructions and all
safety instructions before operating the
device for the first time.
Always wear suitable head protection,
eye protection and hearing protection
when working with the device.
Wear non-slip safety shoes when work-
ing with the device.
Wear non-slip, sturdy gloves when work-
ing with the device.
Danger of death from kickback of the
chainsaw. Never touch the objects to be
sawn with the tip of the guide rail.
Danger of death due to uncontrolled
movements of the chainsaw. Always hold
the chainsaw tightly with both hands.
Danger of death due to uncontrolled
movements of the chain saw. Never hold
the device with just one hand.
Do not subject the device to rain or moist
conditions.
The guaranteed sound level specified on
the label is 105 dB.
The chain brake is released.
The chain brake is locked and the saw
chain is blocked.
Lubrication of the guide rail and the chain
Turn to adjust the chain tension:
+ = Tension the chain
- = Loosen the chain
Running direction of the chain (marking
is under the bar cover)

Protective clothing

DANGER
Risk of fatal injury from cut injuries. Wear suitable pro-
tective clothing when working with the device. Observe
the local regulations for accident prevention.
36
When working with the device, wear a suitable safety
helmet that complies with EN 397 and is CE marked.
When working with the device, wear hearing protection
that complies with EN 352-1 and is CE marked.
For protection against flying splinters, wear suitable
safety goggles that comply with EN 166 or are CE
marked. Or wear a helmet visor that complies with EN
1731 and is CE marked.
Protective helmets with hearing protection and a safety
visor are available in specialist shops.
Chainsawing jacket
Wear a chainsawing jacket satisfying the requirements
of EN 381-11 and labelled with the CE marking when
working with the device.
Wear suitable protective gloves with cut protection
equipment that comply with EN 381-7 and are CE
marked when working with the device.
Wear suitable leg protectors with all-around protection
that comply with EN 381-5 and are CE marked when
working with the device.
Wear non-slip safety shoes that comply with EN 20345
and are marked with a chainsaw symbol working with
the device. This ensures that the safety shoes comply
with EN 381-3.
If you only use the chainsaw occasionally, the ground is
level and there is little danger of tripping or snagging in
bushes, you can use safety shoes with steel front caps
and protective leggings that comply with EN 381-9.

Description of the device

The maximum amount of equipment is described in
these operating instructions. Depending on the model
used, there are differences in the scope of delivery (see
packaging).
See graphics page for illustrations
Illustration A
Chain oil tank cap
1
Chain
2
Guide rail
3
Bar cover
4
Bar mounting nuts
5
Chain tensioning screw
6
Bucking spikes
7
Chain catcher
8
Hand guard/chain brake lever
9
Handle, front
10
Battery pack unlocking button
11
Type plate
12
Trigger lockout button
13
Handle, rear
14
Trigger
15
Hex wrench with screwdriver
16
English
Head protection
Protective gloves
Leg protection
Safety shoes