Publicidad
Idiomas disponibles
Idiomas disponibles
The rotating beacon is attached to the roof of the vehicle with an in-
stalled magnetic base. It should be attached in a location that is cle-
arly visible from all sides. As significant jolts or even contact with low
branches can occur during operation, we recommend that the light
base is additionally screwed to the roof of the vehicle. To do so, you
need 3 self-tapping screws with a diameter of 3 mm (not included in
the scope of supply).
It is connected to the 12/24-volt cigarette lighter socket. The coiled
cable is about 3,8 m long when extended.
The LED rotating beacon has 3 possible functions, which can be se-
lected by pressing the red button:
1. Unscrew the lamp glass and press the trigger switch to switch to
the next function.
2. The system has a memory function; the most recently set version
is retained.
Three functions are possible: Single flash: 125 times/min.
Trigger switch for three different functions.
Double flash: 250 times/min.
All-round flash: 120 times/min.
6
Publicidad
