Ironside 200591 Manual De Usuario página 6

200591 - 200592
3.1.1 IGNITION / Manual ignition 200591 and 200592
a. Turn the power switch to position I and check that the fan starts running
correctly. (Fig 2.)
b. Push the gas valve button (Figure. 3) and push repeatedly the piezoelectric
lighter until the flame lights up. (Figure. 4)
Figure.3
c. As the flame lights up, keep the valve button pushed for 10 seconds approx.
should the heater stop when the valve button has been released, wait one
minute and repeat the starting operation keeping the valve button pushed
for a longer time.
d. Regulate the gas flow pressure according to the thermal power desired, by
turning the wheel of the pressure reducer anticlockwise to increase the
pressure or clockwise to decrease.
e. Contact your supplier should any problem continue.
3.1.2 IGNITION / Manual ignition additional function only for 200592
Regulate the flame and output by turning the adjustable knob anticlockwise
to increase or clockwise to decrease. (Figure 5).
Figure.2
Figure.4
Figure.5