Manuales relacionados para DHP 4377019
Resumen de contenidos para DHP 4377019
- Página 1 4377019 Metal Triple Bunk Bed Twin/Twin/Full Black Weight Limit: Upper Bed: 200 Lb / 91 Kg Middle Bed: 200 Lb / 91 Kg Lower Bed: 450 Lb / 204 Kg THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
-
Página 2: Warranty Information
Warranty Information Read Before Beginning Assembly warrants this product to be free from defects in material and workmanship and Call our toll free number if you need assistance. agrees to remedy any such defect. This warranty covers one year from the date of Work in a spacious area and near where the unit will be used, preferably on a original purchase. - Página 3 Parts All in 1 big box! There are inner box(es) that include components required to complete this assembly. Before you throw the package, please use the Post Post Post Post Side Guard Rail Side Guard Rail Check Box to identify the parts and ensure that T971690 T971680 T972970...
- Página 4 Parts All in 1 big box! There are inner box(es) that include components required to complete this assembly. Before you throw the package, please use the Slats Slats Ladder Connector Bar Check Box to identify the parts and ensure that T919610 T919600 T971760...
-
Página 5: Hardware Pack
Hardware Pack 1/4" X 11/16" X 42 5/16" X 1" 1/4" X 1 1/16" 1/4" X 1 1/4" 1/4" X 1 3/4" 1/4" X 2" 5/16" 5/16" Spring Washer 1/4" Wrench ST4.2 X 14mm Metal Washer Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions. - Página 6 Step 1 Option 1 This bed offers you 2 options. Side ladder at left: From STEP 2 to STEP Side ladder at right: From STEP 13 to STEP 23. Option 2...
- Página 7 Step 2 Option 1 From step 2 to step 12 will show you how to assemble side ladder Z1 at left side. Attach T, I1 and I2 to A/B with Ladder holes on T should be close to B. X 12...
- Página 8 Step 3 Attached T1 and I X 2 to C/D with Warning label must be oriented on the same side as the side rail holes toward inside and upside of bed. X 12...
- Página 9 Step 4 Slat slot on E must be oriented towards inside of the bed. Two people needed for this assembly. Attach E X 2 to the top of A/D and B/C with...
- Página 10 Step 5 5.1 Attach the remaining E to B/C at Slat slot on E must be location indicated with oriented towards inside of the bed. 5.2 Attach F to A/D with...
- Página 11 Step 6 Wide side of the slot should be facing up ! Attach J to B/C and H to A/D with Ladder holes on H must be located close to D.
- Página 12 Step 7 Attach X to T and T1 with...
- Página 13 Step 8 8.1 Insert O into E X 2, E/F and P into J/H as illustrated. 8.2 Lock O and P into place with Y.
- Página 14 Step 9 9.1 Press W onto O and P as illustrated. 9.2 Press Q onto W alternating left and right as illustrated.
- Página 15 Step 10 10.1 Attach Z1 to I1 and T with 10.2 Attach Z1 to I2 with 10.1 10.2 For your safety, the ladder Z1 must be assembled in the direction indicated, upside down is prohibited.
- Página 16 Step 11 Attach L1 X 4 to L X 2 with...
- Página 17 Step 12 12.1 Attach L X 2 to F with 12.2 Attach L X 2 to H with 12.1 For your safety, the ladder must be assembled in the direction indicated, upside down is prohibited. 12.2...
- Página 18 Step 13 Option 2 From step 13 to step 23 will show you how to assemble side ladder Z1 at right side. Attach I X 2 and T1 to A/B with Warning label must be oriented on the same side as the side rail holes toward inside of bed.
- Página 19 Step 14 Attached I1, I2 and T to C/D with Ladder holes on T should be close to C. X 12...
- Página 20 Step 15 Slat slot on E must be oriented towards inside of the bed. Two people needed for this assembly. Attach E X 2 to A/D and B/C with...
- Página 21 Step 16 Slat slot on E must be 16.1 Attach the remaining E to B/C at oriented towards inside of the bed. location indicated with 16.2 Attach F to A/D with 16.1 16.2...
- Página 22 Step 17 Wide side of the slot should be facing up ! Attach J to B/C and H to A/D with Ladder holes on H must be located close to D.
- Página 23 Step 18 Attach X to T and T1 with...
- Página 24 Step 19 19.1 Insert O into E X 2, E/F and P into J/H as illustrated. 19.2 Lock O and P into place with Y. 19.1 19.2...
- Página 25 Step 20 20.1 Press W onto O and P as illustrated. 20.2 Press Q onto W alternating left and right as illustrated. 20.2 20.1...
- Página 26 Step 21 21.1 Attach Z1 to I1 and T with 21.2 Attach Z1 to I2 with 21.2 21.1 For your safety, the ladder Z1 must be assembled in the direction indicated, upside down is prohibited.
- Página 27 Step 22 Attach L1 X 4 to L X 2 with...
- Página 28 Step 23 23.1 Attach L X 2 to F with 23.2 Attach L X 2 to H with 23.1 For your safety, the ladder must be assembled in the direction indicated, upside down is prohibited. 23.2...
- Página 29 Wood Stud Step 24 Please ensure Wood Studs screw is drilled For better performance and stablity, we into Wood Stud. provide extra wall anchors to fasten the bed. Wall 24.1 Place the bunk bed against the wall, mark two points at the same level above the side rail and equally spaced along the side rail(recommendation: between #6 and #7 slat).
- Página 30 Step 25 Tie the bunk bed with F3 at both locations as illustrated. Wall...
-
Página 31: Helpful Hints
Helpful Hints Weight Limit: Upper Bed: 200 Lb / 91 Kg Middle Bed: 200 Lb / 91 Kg Move your new furniture carefully, with two Lower Bed: 450 Lb / 204 Kg people lifting and carrying the unit to its new location. - Página 32 WARNINGS for Bunk Bed Follow the information on the warnings appearing on the upper and middle bunk end structure and on the carton. Do not remove warning label from bed. Always use the recommended size mattresses or mattress supports, or both, to help prevent the likelihood of entrapment or falls. Use twin mattress which is 74"...
- Página 33 Metal Triple Bunk Bed Individual/Individual/Matrimonial Negro Lea antes de comenzar a ensamblar Llame a nuestro n mero gratuito si necesita asistencia. Trabaje en un rea espaciosa y cerca de donde su producto ser utilizado, preferiblemente sobre una alfombra o utilice el cart n del empaque para proteger su piso y su producto.
-
Página 34: Paquete De Componentes
Partes Instrucciones Paso 1 Esta cama le ofrece 2 opciones. Lado de la escalera a la izquierda: De Paso 2 al Paso 12. Todo se incluye en 1 caja grande! Escalera en el lado derecho: De Paso 13 al Paso 23. Paso 2 En el paso 2 que paso 12 ense ar a montar lado escalera Z1 en lado Hay 1 caja(s) interna(s) que incluyen los componentes necesarios para... - Página 35 Instrucciones Paso 14 Una I1, I2, T con C/D con Paso 15 Una J X 2 con A D con B/C con Paso 16 16.1 Una E con B/C con 16.2 Una F con A/D con Paso 17 Una J con B C con H con A/D con Paso 18 Una X con T con T1 con...
- Página 36 Consejos tiles L mites de peso: Cama superior: 200 lbs / 91 kgs. Mueva sus muebles nuevos con cuidado, con dos personas levantando y Cama Media: 200 lbs / 91 kgs. llevando el aparato a su nueva ubicacin. Cama inferior: 450 lbs / 204 kgs. Sus mueblesse pueden desmontar y volver a ensamblar en caso de mudanza.
- Página 37 Metal Triple Bunk Bed Lit une place/Lit une place/Lit deux places Noir CE FEUILLET CONTIENT DES INFORMATIONS DE S CURIT IMPORTANTES. S'IL VOUS PLA T LIRE ET CONSERVER POUR R F RENCE ULT RIEURE. Avant de commencer l'assemblage Si vous avez besoin d'aide, appelez notre service la client le sans frais.
- Página 38 Pi ces Instructions tape 1 Ce lit vous offre 2 options. chelle gauche : De tape 2 tape 12. Tout dans 1 grosse bo te! chelle droite : De tape 13 tape 23. tape 2 Il y a des bo tes int rieures qui contiennent les composants pour completer De l' tape 2 de l' tape 12 vous montrera monter c t chelle Z1...
- Página 39 Instructions tape 14 14.1 Attacher T C/D avec 14.2 Attacher I2 C/D avec 14.3 Attacher I1 C/D avec tape 15 Attacher J X 2 C avec tape 16 16.1 Attacher E B/C avec 16.2 Attacher F A/D avec tape 17 Attacher J D avec tape 18...
-
Página 40: Conseils Utiles
Limite de Poids: L'utilisation de matelas d'eau ou de matelas flottant est strictement interdite. Lit sup rieur: 200 lbs / 91 kgs. Ne pas utiliser rehausser de lit sous ce produit. Milieu Lit: 200 lbs / 91 kgs. Risque d' tranglement - jamais installer ou acrocher des articles n'import Lit inf rieur : 450 lbs / 204 kgs.