Beper P301PIS001 Manual Del Usuario página 8

Hair Curling Iron Use instructions
Description of product Fig.A
1. Cool tip
2. Hair clamp
3. Clamp button
4. ON/OFF switch
5. Top decorative block
6. Power cable
7. Handle
8. LED working light
9. Curling iron 25mm diameter
Use
Plug the appliance to the wall socket, and press the ON/OFF switch: the LED working light turns blue, the curling
iron starts heating up, to reach the maximum temperature of 180°C in about 1 minute.
Part the hair in locks not too thick, brush well to remove any tangles. Insert one hair lock at a time between the
curling iron and the clamp, and place the hair evenly. Gently slide the curling iron down the hair lock till you
reach the tips; to avoid tips from clamping, make sure they are well distributed under the clamp in the direction
of the desired curl. For well defined curls and waves, keep the clamp on top of the hair lock. Wind up the hair
lock around the curling iron until your each the desired height, making sure not to get the curling iron too close
to the scalp; keep the hair lock winded up for approx. 5-8 seconds, depending on the desired styling and the
length of the hair.
For a more defined texture (bouncy curls), part the hair in smaller hair locks; for a more natural, wavier look, part
the hair in thicker hair locks.
Cleaning and maintenance
Before proceeding with any cleaning operation, unplug the appliance from the wall socket and let it cool down
completely.
Use a soft cloth, slightly dampened in water, to clean the curling iron and the clamp.
Do not let water or any other liquid penetrate inside the appliance.
Warning: do not immerse the appliance in water or other liquids.
When not in use, allow the appliance to cool down completely, then store it away from dust, humidity and direct
sunlight, and out of the reach of children.
Technical data
Power: 35W
Input: 220-240V~ 50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be disposed of in the normal unsorted municipal
waste stream. Old appliances must be collected separately in order to optimize the recovery and
recycling of the materials they contain, and reduce the impact on human health and the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when you
dispose of the appliance, it must be separately collected.
8