Vivanco MSFLU 20 Manual Del Usuario página 4

Laser FM Velvet Mouse – MSFLU 20
Introduction
Welcome, you have made an excellent choice ...
by deciding in favour of an innovative technology which provides you
with unique benefits. Take a few minutes to
read this instruction manual carefully. It will help you to understand
and master the different functions.
Instead of the customary ball your mouse has a newly-developed
optical laser sensor. This is in the position to guarantee precise
scanning and cursor control on almost all surfaces. The special
surface of the mouse ensures pleasant and safe working even over
longer periods of time.
Important Ergonomic Information
Some experts believe that using any mouse or trackball may cause
serious injury to hands, wrists, arms, neck, or
back. If you feel pain, numbness or weakness in these areas, see a
qualified health professional.
To reduce the risk of injury, follow these precautions:
· Take frequent breaks, get up and walk around several times every
hour.
· Vary your tasks throughout the day.
· Keep your shoulders relaxed with your elbows at your side.
· Position your keyboard and mouse so that you do not have to
stretch.
· Adjust your chair and keyboard so that your upper arms and wrists
are straight.
· Avoid resting your wrists on sharp edges.
System Requirement
· Mouse compatible with standard Microsoft® mode
· 3rd button and wheel function require Win® 98 SE/2000/ME/XP
· The 4th and 5th keys require Windows® XP or 2000 or rather,
installation of the enclosed drivers
· The 6th button requires the installation of the enclosed driver
· If you use Windows® 98SE, please have your Windows®
Installation CD ready when installing
Before you begin
· Keep this installation guide for future reference! It contains
important troubleshooting information.
Package Contains
Your Laser FM Velvet Mouse package includes the following:
1. Laser Mouse
2. Recharging station with integrated USB Hub
3. This manual
4. Driver CD
Note: If any part is missing, please contact your dealer immediately
for a replacement.
USB installation
1. Connect the USB plus of the mouse to a USB on your PC
2. The PC recognises new hardware and loads standards drivers
from the Windows CD
3. The basic functions of the mouse are now available
4. Place the driver CD in the drive of the PC
5. Double click on your CD drive in Explorer or on your desktop.
Double click to start the file "Setup.exe"
6. The installation routine starts automatically. Follow the instructions
on the screen.
Upon completing installation you will be asked if you want to restart
the PC or wait until later. Please note that all alterations do not
become effective until the PC is restarted.
Connect mouse and receiver
Normally mouse and receiver are now connected already via radio.
Should this not be the case execute the following steps:
a) place the mouse near the receiver (max. distance 30cm)
b) turn the mouse round on the back and press once quickly on the
„connect" button using a biro or a paper clip.
c) press quickly on the „connect" button of the receiver (max. 6
seconds later) to establish the connection
d) move the mouse, the mouse cursor should now move. If this is
not the case please check all connections and begin at a)
Programming the keys
After the drivers are installed, the mouse buttons have the following
default functions:
„Office Shortcuts" „Internet Shortcuts"
Direct start of Direct start of
Office applications Internet applications
You can also change the key functions. Click on the task bar and
open "Mouse Settings":
Select the required function for the respective button from the list.
Then click on "Apply" and "OK" to activate the new function.
Change of the mouse sensitivity
By pressing the „1.600 dpi" button on the top of the mouse you can
switch the sensitivity of the laser sensor from 800 to 1.600 dpi (and
vice versa). Depending on the application a smaller or greater
sensitivity is useful. The blue LED marks the selected resolution (on:
1.600dpi, off: 800dpi).
- 4 -