Concept RM7000 Manual De Instrucciones página 30

EN
Blender
IMPORTANT
DO NOT attempt to use this function while grinding or mixing.
1. Do not connect the appliance to the mains until the blender container is in the correct position.
2. Remove the plug from the wall outlet before removing the container from the blender.
3. Blended food in the container must not exceed 80 °C.
4. To avoid spillage, do not exceed 1.5 litres of liquid in the blender container.
5. Warning: Never remove the lid from the blender container while blending.
6. Do not use the blender for more than 2 minutes.
Function
The blender can be used for both blending and mixing. It can be used for example for preparing soup, sauce, milk shake,
baby food, blending vegetables, fruit, purée, etc. For easier operation, cut the food into small pieces before placing it in
the container.
Blender instruction manual
• Remove the back cover (Fig. 1).
• Place the food in the glass container.
• Place the lid on the glass container.
• Insert the measuring cup into the lid opening and turn it clockwise.
• Place the blender container on the appliance and turn it counter-clockwise
(Fig. 2).
• Insert the plug into the wall outlet.
• Set the speed control button to the desired position 5 / P.
• Switch off the appliance and unplug it.
• Remove the measuring cup with the lid.
• Remove stuck food from the inside of the container with a soft spatula.
Keep the spatula away from the blades.
• To remove the blender container, turn it clockwise.
• To remove the measuring cup, turn it counter-clockwise.
TIPS
• Add food only when the appliance is switched off. If you remove the measuring
cup from the lid, you can add food while the appliance is running.
• From time to time it is necessary to switch off the appliance and remove stuck
food from the inside of the container.
58
Grinder
IMPORTANT
DO NOT attempt to use this function while blending or chopping.
1. Cut boneless meat into pieces. Approximately to the size of 20 × 20 × 60 mm so as
to be easily inserted in the opening of the container.
2. Inserted food should not contain bones and other hard parts. Bones could cause
the motor to stop. If the motor stops, stop the appliance immediately and unplug
it. Remove the entire meat grinder assembly. If the motor stops automatically,
eliminate the cause of the stop. After the motor has cooled down, it is possible to
continue.
3. Switch the appliance on by pressing the speed control button (4) to the speed 5.
4. Place the food in the container exclusively using the stamper.
5. After grinding is completed, turn the speed control button (4) to the "OFF" position
and remove the plug from the wall outlet.
6. Maximum grinding time is 5 min. in continuous operation.
Assembly instructions for grinder
• Remove the front cover (Fig. 1).
• Place and turn the grinder body counter-clockwise so that it clicks firmly into place
(Fig. 2). Place the container on the grinder body.
• Place the meat container under the grinder.
• Place the container on the grinder body (Fig. 3).
• Insert the plug into the wall outlet.
• Set the speed control button to position 5. Then place the food in the container and
Fig. 1
push it into the container with the stamper.
• After use, switch off the appliance and unplug it.
• Press the grinder locking button (see Fig. 1). Turn the grinder clockwise and remove
the entire grinder assembly (Fig. 4).
• Place back the front cover.
Fig. 2
RM7000 RM7000
EN
Release
button
Fig. 1
Fig. 2
Fig. 3
Fig. 4
59