Tabla de contenido
Publicidad
Cleaning and care
Danger! Electric shock due to penetration of
liquid.
f Do not immerse the appliance in water!
f Do not allow any liquid to get inside the appliance.
f Only reconnect the appliance to the power supply
if it is completely dry.
Caution! Danger from aggressive chemicals.
Aggressive chemicals could damage the appliance
and accessories.
f Never use solvents or scouring agents.
f Only use cleaning agents and blade set oil recom-
mended by the manufacturer.
Accessories and spare parts are available from your
dealer or our service centre.
f Remove the attachment comb (Fig. 5) after every use and
lift the blade set out of the casing (Fig. 6). Use the cleaning
brush to remove any cut hairs from the housing opening
and from the blade set (Fig. 9).
Caution! Injuries due to incorrect handling.
f The blade set must not be unscrewed.
f The top blade must not be pushed out completely!
f Push the top blade to the side (Fig. 9ⓐ) and remove cut
hairs from the top and bottom blade using the cleaning
brush. After cleaning, return the top blade to its initial posi-
tion (Fig. 9ⓑ). The top blade should be aligned in the centre
of the bottom blade.
f After cleaning the blade set, we recommend using hygienic
spray. It keeps all blade sets hygienically clean and is effec-
tive against bacteria and viruses.
f Oil the blade set with the blade set oil (Fig. 10).
f We recommend that you clean and care for your blade set
during and after clipping with Blade Ice spray. The Blade
Ice spray ensures instant cooling, oiling and cleaning of the
blade set, while also protecting against corrosion.
f Reattach the blade set after cleaning (Fig. 7/8). Switch the
appliance on briefly (approx. 10 seconds) to ensure the oil
film is evenly distributed.
f For a good and long-lasting cutting performance, it
is important to oil the blade set frequently.
f If the cutting performance deteriorates after long
use despite regular cleaning and oiling, the blade
set should be replaced.
f Only wipe the appliance with a soft, slightly damp cloth.
Problem elimination
Blade set is cutting badly.
Blade set is pulling hair out.
Cause: Blade set is dirty.
f Clean and oil the blade set (Fig. 9/10).
Cause: Blade set is worn out.
f Replace blade set (Fig. 6/7/8).
Skin injury
Cause: Too much contact pressure on the skin.
f Reduce contact pressure when cutting close to skin.
Cause: Damaged blade set.
f Check whether the blade edges were damaged during use
and replace the blade set if necessary.
Appliance is not working.
Cause: Defective power supply.
f Make sure that there is a faultless contact between the
plug-in transformer and the socket. Check the mains cable
for possible damage.
In the event that this information does not help you resolve your
problem, please contact our service centre. Never attempt to
repair the appliance yourself!
Declaration of conformity
See page 132.
Accessories
Blade sets
See page 129.
Stainless steel attachment combs
See page 130.
Disposal
Handle with care! Environmental damage in the
event of incorrect disposal.
f Correct disposal will ensure environmental protec-
tion and prevent any potentially harmful impact on
people and the environment.
Adhere to the relevant legal requirements when disposing of
the appliance.
Information on the disposal of electrical and electronic
appliances in the European Community:
Within the European Community, national regulations
are specified for the disposal of electrical appliances,
based on EU Waste Electrical and Electronic Equip-
ment Directive 2012/19/EC (WEEE). In accordance
with this, the appliance can no longer be disposed of
with the local or domestic waste.
The appliance will be accepted free of charge by local
collection points or recycling centres.
The packaging for this product is made from recy-
clable materials. Dispose of this in an environmentally
friendly manner by recycling it.
ENGLISH
de
en
fr
it
es
pt
pt
nl
da
sv
no
fi
tr
pl
cs
sk
hr
hu
sl
ro
bg
ru
uk
et
lv
lt
el
ar
13
Publicidad
Tabla de contenido
