Omron MicroAir NE-U100 Manual De Instrucciones página 56

2. Preparation
To connect the AC adapter to the main unit
(1) Remove the battery cover and take out the
batteries (see page 13).
(2) Place the main unit on the AC adapter connection
stand as shown in the illustration on the right.
Note: It will click and lock to the stand.
(3) Insert the AC adapter power plug into an outlet.
Note: Do not place the device in a location where it is
To remove the AC adapter from the main unit
(4) Disconnect the AC adapter power plug from the outlet.
(5) Push on both sides of the connection stand to unlock from
the main unit.
(6) Remove the main unit.
16
(2)
Connection is completed.
(6) Remove
(5) Push both ends
(3)
(4) Unplug