Technical Data - BOMANN DKP 5033 E CB Instrucciones De Servicio

Assembly Instructions
NOTE:
The handle trim must be placed so that it is flush / level with
the top of the handle.
Before first use the appliance must be assembled.
• Place trim piece in the handle.
• Locate handle guide pins in guide holes on the side of the
appliance.
• Insert screws into the 4 screw holes and tighten to hand-
tight. Do not overtighten as this may cause damage to the
appliance.
• Repeat for the other side.
Initial Operation and Using the Appliance
WARNING: Risk of burns!
The appliance can get very hot. Avoid touching the hotplate
when in use and for some time after use.
WARNING:
• Always remove the mains plug before cleaning.
• Wait until the appliance has cooled down before attempting to
clean.
• Under no circumstances should you immerse the appliance in wa-
ter for cleaning purposes. Immersion in water can potentially result
in electric shock or fire.
CAUTION:
• Do not use a wire brush or abrasive materials to clean
the appliance.
• Do not use harsh, abrasive or acidic chemicals to clean
the appliance.
• Before the appliance is cleaned or put away it must have
completely cooled down.
• Clean the appliance with a damp cloth and appropriate
detergent (such as washing-up liquid or cream cleaner).
• Dry the appliance with a dry cloth and store in a cool, dry
place.
DKP5033ECB_Instruction Manual
CAUTION:
Before inserting the plug into the socket – Make sure that
the mains voltage to be used matches the voltage of the
appliance. You can find this information on the nameplate
on the underside of the appliance.
• Place appliance on a flat, level, sturdy surface.
• Insert plug into mains outlet / wall socket.
• Select the appropriate hotplate for the size of cooking
utensil / pot / pan being used. The larger hotplate (185 mm
diameter) is rated at 1500 W max and the smaller hotplate
(155 mm diameter) is rated at 1000 W max.
• Turn power knob clockwise to desired level (between
"MIN" and "MAX"). The Power Indicator Light will illumi-
nate.
• Put pan(s) / pot(s) on the hotplate(s).
• When finished turn power knob anti-clockwise to "MIN"
and remove plug from socket. The power light will turn off.
Caution - the hotplate will remain hot for some time after
switching off.
• Allow appliance to cool down before moving, cleaning or
putting away.
Cleaning
Model:.............................................................. DKP 5033 E CB
Power supply:...................................................... 230 V~, 50 Hz
Power consumption: ............. 2500 W max (1500 W + 1000 W)
Protection class: ......................................................................
Net weight: ..........................................................approx. 3.7 kg
Dimensions (including handles): ..... approx. 590 x 70 x 280 mm
The right to make technical and design modifications in the
course of continuous product development remains reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.

Technical Data

26.09.16
27