Kohler K-6330 Guia De Instalacion página 5

Channel
Square-Head
Bolt
5. Install the Angle Bracket
- Install the angle bracket to the bottom of the channel with the short,
square-head bolt, washer, and hex nut. Handtighten the hex nut - do
not wrench tighten at this time.
6. Secure the Angle Bracket
- When installing with a stainless steel sink, use a level to make sure
the spout is plumb. Position the channel as needed.
- When installing to any sink, adjust the height of the angle bracket so
it rests on the cabinet floor.
- Secure the angle bracket to the cabinet floor with two screws suitable
for the material.
- Securely wrench tighten the angle bracket hex nut.
Kohler Co.
Hex
Nut
Washer
Channel
Angle
Bracket
5
Hex Nut
Screws
Cabinet
Floor
A
1025493-2-