Important Safety Information - Poppstar 201202 Manual De Instrucciones

EN

IMPORTANT SAFETY INFORMATION

Congratulations and thank you for purchasing this Poppstar product.
Please read the instructions for use carefully. Store this manual safely throughout
the product's entire service life and pass it on to any subsequent users or owners.
Check that the supplied package is complete and ensure that none of the parts are
defective or damaged.
Safety instructions
Use the product for its intended purpose only. You must check that the installation
surface is suitable before installation. Make sure there are no electric cables or water,
gas or any other pipelines where you wish to mount the product.
Note that the supplied wall plugs are approved for wood or concrete and full brick
walls only. You need to obtain special installation material if the product is to be
installed on any other type of surface. Mount the product in locations where there is
no risk of injury to people or animals if the product falls or comes loose.
Check that the product is firmly in place and functions safely once you have installed
it. This check is to be repeated on a regular basis. In case of damage, stop using the
product immediately and dismantle it.
Always use two people to mount and position the wall bracket. Ensure that the
weight of your television is within the wall bracket's maximum bearing capacity.
Do not place more load on one side of the bracket than the other because the
weight may exceed the bearing load.
Wear work gloves and use tools in full working order for your protection to prevent
any injuries when working on and installing or dismounting the bracket.
Keep packaging film and bags away from babies and small children as they pose a
suffocation hazard.
Ensure that you carefully smooth out any sharp edges and burrs which form when
you trim cable ducts. Make sure the insulation cannot be damaged when installing
cables.