Before installing this device, please read the instructions very carefully.
These heating elements are available in the following models:
-
-
-
Directions
To raise the temperature of 1 m
water in 1 hour by 1°C needs about 1.000 kcal. This formula is only an indication, as the temperature also depends
3
40°C. The heating element with the temperature probe(B), as well as the inside of the casing have been manufactured out of high-quality stainless
Safety
• Always remove the plug from the socket when mounting, dismantling or servicing the heater.
• Do not use the heater if any of the parts are damaged.
•
overheat and burn out.
inlet and outlet on top.
• The requirements of the Electricity Company must be met when this heater is to be connected as a permanent feature. If in any doubt, please
contact a licensed electrician or the Electricity Company.
Maintenance
• This heater must never be submerged under water. It must always be installed outside the pond or bowl.
• The manufacturer must always do any needed repairs. The adjustable thermostat must never be opened.
All guarantees expire once the thermostat has been opened.
•
• Prevent air getting into the system. If a part of the element is not covered with water, this section can become over heated and cause the
element to burn out.
Installation
•
there is no strain on the connection to the frogs.
• Cut the tube connectors to the required length (or use the frogs) and twist these, as well as the rubber sealing ring, into the 50 mm adapter by
hand. Prevent any damage by only using the connectors and frogs provided.
• E
This ensures that there will always be water in the apparatus, even if the pump should fall out accidentally.
•
• Put the plug into the socket and set the thermostat to the desired temperature. As soon as the set temperature has been reached, the light will
Guarantee conditions
The product is guaranteed against manufacturing faults for 2 years from the date of purchase. No guarantee can ever be given on the element
burning out and causing a short. Guarantee claims can only be handled if the product is returned post-paid and providing a valid proof of purchase
is included. Guarantee claims which are caused by installation or operating faults will not be recognised. Defects arising from lack of maintenance
do not fall under the guarantee. Guarantee repairs may only be carried out by the supplier. The supplier can not be held liable for consequential
damage arising from failure, faulty maintenance or incorrect use of equipment. The guarantee will lapse if extra facilities are added to the product
the plug or the drilling of extra holes).
pond capacity:
5.000 L
pond capacity: 10.000 L
pond capacity: 15.000 L
GB