The Keys On The Tv Set - Philips 72TA5214/03 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

The keys on the TV set

a
-
+
-
+
P
-
-
+
+
VOLUME
PROGRAM
Tips
ß
8
The television set has 4 keys which are located on the front or the top
of the set depending on the model.
The
- + (-a+) keys are used to adjust the sound level.
VOLUME
The
- + (- P +) keys are used to select the required
PROGRAM
programmes.
To access the menus, hold down the
simultaneously.Then use the
and the
- + keys to make the adjustment.
VOLUME
To exit from the menu, hold down the
for a few seconds.
Poor reception or no picture
The proximity of mountains or high buildings can cause ghost pictures,
echoing or shadows. If this is the case, try tuning the picture using
(p. 4).
TUNE
Do you have the right system (p. 4)?
Check that the aerial plug or euroconnector plug is properly connected.
Check also that your aerial is capable of receiving broadcasts in this
frequency range (
UHF
Adjusting the picture
In case of bad reception (fuzzy picture), set the
The picture is in black and white
To read a video cassette, check that it is recorded in the same format as
that of the video recorder (
No sound
If certain programmes have a picture but no sound, this is because you
do not have the correct TV system (see p. 4).
Standby
The set switches automatically to standby if it receives no signals for a
period of 15 minutes.
When it is in standby mode, the set uses energy.To save electricity, we
advise you to switch it off using the on-off button.
Still having problems?
If the set breaks down, never try to repair it yourself. Consult your after-
sales service department instead.
Recycling
The materials used in your set are either reusable or can be recycled.
To minimise environmental waste, specialist companies collect used
appliances and dismantle them after retrieving any materials that can be
used again (ask your dealer for further details).
VOLUME
- + keys to select an adjustment
PROGRAM
VOLUME
or
).
VHF
,
or
PAL
SECAM
NTSC
- and
+ keys
VOLUME
- and
+ keys
VOLUME
FINE
to
: p. 5.
NOISE RED
ON
).

Publicidad

Tabla de contenido
loading

Tabla de contenido