Safety Instructions; Product Overview - V-TAC VT-8505 Instrucciones De Instalación

ENGLISH

SAFETY INSTRUCTIONS

1. Installation should only be done by a certified electrician.
2. Before commencing installation or maintenance, isolate the main electrical.
supply for appropriate circuit at the fuse board.
3. This product is only suitable for connecting to a 240V 50Hz supply.
4. The mirror light should be mounted onto a secure surface.
5. When installing, please take care to avoid water pipes, joints, and electrical
cables.
6. This product has a rating of IP44.
7. Do not exceed or stretch cables.

PRODUCT OVERVIEW

• This illuminated LED mirror is a sleek addition to any bathroom, providing
beautiful lighting.
• The mirror light features stylish soft-edge corners, as well as an illuminated
front face, which is perfect for everyday tasks.
• The mirror light is built-in with demister pad which guarantees that the
mirror light will always stay perfectly clear.
TYPES OF BATHROOM LIGHTING ZONES:
0 - Inside the bath or shower. Must be SELV (12V Max) due to water submer-
sion. Minimum rating of IP67.
1 - 225cm above the bath or shower. Minimum rating of IP44.
2 - The area stretching to 60cm outside the bath or shower, and 60cm from
the water outlet of the sink. An IP Rating of at least IP44 is required.
Outside Zones - Anywhere outside zones 0, 1 and 2, where water jets are not
used for cleaning purposes, the general rules of BS7671 apply.
NOTE: V-TAC Mirror Lights are IP44 rated and suitable for installation
in zone 2 and the outside zones ONLY.