Publicidad
Idiomas disponibles
Idiomas disponibles
I N S TA L L AT I O N
I N S T R U C T I O N S
O V E R A L L
D I M E N S I O N S
M O D E L S I C B D D 4 5 I A N D I C B D D 4 5 R
Overall Width
Width of Chimney
Overall Height (above countertop)
Overall Depth
Depth of Chimney
Dimensions may vary to + – 3 mm.
1156 mm
230 mm
1048 mm
38 mm
DEPTH OF
DOWNDRAFT CHIMNEY
Models ICBDD45I and ICBDD45R
E L E C T R I C A L
Wolf downdraft ventilation systems require a
separate, 240 V 50/60 Hz power supply. The
1156 mm
service should have its own 10A circuit
breaker. The unit is supplied with a 2.5 m CEE
1048 mm
7/7 "Schuko" style Continental European
230 mm
power cord. The specific location of the outlet
60 mm
is not critical, as long as it is within reach of
the power cord that is located mid-way, top
38 mm
and bottom, on the right side of the downdraft.
IMPORTANT NOTE: If Model ICBDD30 is to be
installed in a 762 mm wide cabinet, Model
ICBDD36 in a 914 mm wide cabinet or Model
ICBDD45 in a 1156 mm wide cabinet, the
electrical outlet cannot be located on the back
wall of the cabinet. The outlet can be placed in
an adjacent cabinet within reach of the power
cord. An access hole for the power cord must
be drilled in the cabinet wall.
Choose the electrical location shown in
the illustration below that best suits your
installation.
60 mm
Location of electrical
R E Q U I R E M E N T S
E
OPTIONAL
762 mm
min
ELECTRICAL
FOR MODEL ICBDD30
LOCATION IN
ADJACENT RIGHT
914 mm
min
SIDE CABINET
FOR MODEL ICBDD36
1156 mm
min
FOR MODEL ICBDD45
I M P O R TA N T
N O T E
You must follow
all National
Electrical Code
regulations. In
addition, be aware
of local codes and
ordinances when
installing your
service.
7
Publicidad
