Nexxt NHA-1600 Guia Del Usuario página 13

Using the application interface, test each of the buttons on
the electronic device and/or appliance you programmed.
Step 10
9:41 AM 60 %
DIY configuration
If the device is not included in the Device type list, click on
the Self-learning DIY option to start programing the
remote control buttons in the Smart IR controller app.
Notes:
1. The device only supports self-learning on a 38kHz carrier
frequency.
2. Self-learning is not compatible with voice commands.
3. The self-learning function is not recommended for air
conditioning units.
4. Refer to compatibility list if unable to program the
device. It may not be supported by the smart IR remote.
9:41 AM 60 %