Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Installation instructions for AX-MLINK-HD
Car audio Wi-Fi A/V mirror interface through HDMI
With this Wi-Fi interface you will be able to mirror your IOS or Android device on your aftermarket in-dash
mobile video screen.
Note: This will not allow the mobile device to be operated from the aftermarket screen. All operations
(button presses) will need to be executed from the mobile device.
Mirroring capabilities are determined by the smart devices' (phone, tablet, etc.) software and the network
provider's permissions given to the device. Software updates can change the devices ability to mirror
certain types of video/audio.
• Wi-Fi mirror interface
• Cable to Car Audio (power connection)
1. Power LED: Blue light on when power on.
2. Antenna connector: Connect external
Wi-Fi antenna.
3. Reset:
(a) Press 1 second for reset.
(b) Press 5 seconds for factory
default settings.
4. Mode/Upgrade:
(a) Press once for switching between IOS Air
Play system and Android Miracast system.
METRA. The World's best kits.™
AX-MLINK-HD
Interface components
• Wi-Fi antenna
Interface DescrIptIon
(b) Press 5 seconds for upgrading software.
5. USB: Charge (5-volts 1-amp)/software upgrade.
6. Power/AV-IN: Power cable connections
to car audio ACC/GND.
7. HDMI port: Output to radio (HDMI cable
s old separately).
1-800-221-0932
Installation to the aftermarket radio:
• Connect the Red wire to the accessory wire.
Note: It is suggested to add a 3A fuse in-line with
the accessory wire.
• Connect the Black wire to the ground wire.
• Connect an HDMI cable (not supplied), to the the
HDMI port in the AX-MLINK-HD.
Note: Make sure to place the interface in an area
you can easily access it in case the "Mode" needs
to be changed from IOS to Android, or vice versa.
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com
© COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION
WIrInG tHe aX-mLInK-HD
(continued on next page)
Publicidad
Tabla de contenido
Resumen de contenidos para Metra AXXESS AX-MLINK-HD
- Página 1 (b) Press 5 seconds for factory s old separately). reconnecting the battery or cycling the ignition. default settings. 4. Mode/Upgrade: NOTE: Refer to the instructions included with the aftermarket radio. (a) Press once for switching between IOS Air Play system and Android Miracast system. METRA. The World’s best kits.™ 1-800-221-0932 metraonline.com © COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION...
- Página 2 AX-MLINK-HD How to link On the aftermarket in-dash mobile video screen: 2. On your IOS device, double-click the Home button to display your recently used apps. • Have the device in the HDMI IN source; depending on the brand of screen you have, this may be labeled differently. 3. Swipe the recently used apps twice from left to right until you see the AirPlay icon. Tap the AirPlay icon to display a list of available AirPlay devices. IOS SyStEM • If you do not see the AirPlay icon, your device may not be connected successfully. On the interface: 4.
-
Página 3: Technical Specification
AX-MLINK-HD How to link Important notes: WI-fI MIRAcASt SUPPORt DEVIcES 1. This product does not require a network: IOS mode, to use AirPlay Mirroring, you need the following devices: • The Wi-Fi A/V mirror interface uses a Wi-Fi direct connection and does not iPhone 4s or later require a network connection to your mobile device. IOS 6 & up iPad 2 or later 2. Screen time out setting: iPad mini or later • If the screen time out setting is enabled on your phone and your phone iPod touch (5th generation) times out, no image will display on the aftermarket in-dash mobile video screen until you access your phone screen again. “Mirror” will continue to Android mode, to use Miracast/AllShare-Cast/Screen-Mirroring, you display on your player indicating connection status. -
Página 4: Important Warning
Interference with certain safety systems could cause harm to persons as well. Enhance your installation and fabrication skills by If you have any questions in this regard please call the Help line or Metra at enrolling in the most recognized and respected mobile electronics school in our industry. -
Página 5: Interfase De Duplicación De A/V Wi-Fi Del Audio Del Vehículo A Través De Hdmi
(continúa en la página) desCripCión de la interfase (b) Presione 5 segundos para actualizar el 1. Foco de encendido: El foco azul se ilumina cuando está encendido. software. PRECAUCIÓN: Metra recomienda desconectar el terminal 2. Conector de antena: Conectar antena Wi-Fi externa. 5. USB: Carga (5 voltios 1 amperio)/ actualización negativo de la batería antes de comenzar cualquier de software. 3. Restablecer: instalación. - Página 6 AX-MLINK-HD Cómo vincular En la pantalla móvil en el tablero de mercado secundario: 2. En su dispositivo iOS, haga doble clic en el botón Inicio para mostrar sus aplicaciones utilizadas recientemente. • Ponga el dispositivo en la entrada HDMI IN; dependiendo de la marca de pantalla que tenga, los nombres pueden ser diferentes. 3. Deslice las aplicaciones utilizadas recientemente de izquierda a derecha hasta que vea el icono de AirPlay. Toque el icono de AirPlay para mostrar una lista de dispositivos AirPlay disponibles. SIStEMA IOS • Si no ve el icono AirPlay, su dispositivo puede no estar En la interfase: conectado correctamente.
- Página 7 AX-MLINK-HD Cómo vincular Notas importantes: DISPOSItIVOS DE SOPORtE WI-FI MIRACASt 1. Este producto no requiere red: Modo iOS, para usar la duplicación de pantalla con AirPlay, necesita • La interfase de duplicación Wi-Fi A/V utiliza una conexión directa Wi-Fi y no los siguientes dispositivos: requiere de una conexión de red en su dispositivo móvil. iOS 6 y más iPhone 4s o posterior 2. Parámetro de apagar pantalla: recientes iPad 2 o más reciente iPad mini o más reciente • Si el parámetro de apagar pantalla después de un tiempo determinado está activado en su teléfono y la pantalla se apaga, no se mostrará ninguna iPod touch (5a generación) imagen en la pantalla de video móvil de mercado secundario en el tablero...
-
Página 8: Advertencia Importante
Si tiene alguna pregunta al respecto, llame a la línea enrolling in the most recognized and respected mobile electronics school in our industry. móviles más reconocida y respetada de nuestra de ayuda o a metra, al 1-800-221-0932 para obtener asistencia. Log onto www.installerinstitute.com or call industria. Regístrese en www.installerinstitute.com o 800-354-6782 for more information and take steps llame al 800-354-6782 para obtener más información y...