Setting Up Power Supply; Lighting Settings; Ec Declaration Of Conformity - Bresser SV-1000 Información De Usuario

4 | About this Instruction Manual
25 Fuse compartment
27 DC connection socket (Battery Power
Pack)
29 Rod connection (reflecting umbrella)
31 COLOR rotary knob (colour temperature)
Scope of delivery
LED Spot light (A); antiglare flaps attachment (B); power cable (C); Instruction manual

4 Setting up power supply

1. Put the C13 coupling of the power cable into the C13 socket of the flash device.
2. Put the Euro-plug of the power cable into the wall socket (230V maximum voltage).
3. Move ON/OFF switch to position 'I' to turn on the device.

5 Lighting settings

1. Turn the MODE rotary knob to set the desired brightness. The value is displayed on the "bright-
ness" display screen.
NOTICE! Brightness can be adjusted stepless, whereby 10 is the lowest and 30 the highest
level.
2. Turn the SPOT rotary knob to adjust the light focus.
3. Only for bicolor models: Turn the COLOR rotary knob to set the desired colour temperature. The
value will be displayed on the "colour temperature" display screen.
NOTICE! The colour temperature can be adjusted stepless between 3200K and 5600K.

6 EC Declaration of Conformity

Folux B.V. has issued a "Declaration of Conformity" in accordance with applicable guidelines
and corresponding standards.
7 Warranty
The regular guarantee period is 2 years and begins on the day of purchase. To benefit from an exten-
ded voluntary guarantee period as stated on the gift box, registration on our website is required.
You can consult the full guarantee terms as well as information on extending the guarantee period and
details of our services at www.bresser.de/warranty_terms.
8 / 9
26 DMX-in connection socket
28 SYNC connection socket (6.35mm)
30 Fixing screw (rod connection)
32 C13 power cable with Euro-plug
Quickstart_SV-LED-Lights_de-en_BRESSER_v012017a