Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Congratulations on your purchase of the Wilderness Systems Helix PD
pedal technology. It has been designed and manufactured with the utmost attention to detail and with a special focus on
performance, user-friendliness and safety.
Please visit WildernessSystems.com to download the full Owner's Manual for complete assembly instructions of the Helix
PD system.
For your safety and to ensure the highest level of enjoyment from the Helix PD it is imperative that, prior to use, you read and
comply with the full Owner's Manual. Failure to follow the instructions can result in damage or personal injury. Wilderness
Systems accepts no liability for any damage caused by actions that contradict the Owner's Manual.
The Helix PD is intended for use in select Wilderness Systems Helix PD compatible kayaks.
IMPORTANT SAFETY AND OPERATING INFORMATION
The Helix PD is designed to operate safely and reliably as long as it is used according to the Owner's Manual.
Think Safety!
•
Stay clear/use caution when raising the spring-loaded mast of the Helix PD
•
Remove system from kayak when transporting kayak
•
Keep hands and limbs clear of scupper area when deploying or raising the Helix PD
•
Keep gear and other objects clear of scupper area when deploying or raising the Helix PD
•
Use the stowage straps with the Helix PD when in rough water or during surf launches
•
Stowage straps should not be used for transporting or securing your kayak
•
Do not operate with mast in the zero draft (raised vertical) position for extended periods
•
Rinse the system with fresh water after use in brackish or salt water
•
Be aware of your environment when operating the Helix PD
•
Avoid collisions and impacts to the system
•
Raise unit when launching and coming ashore
•
Ensure the Helix PD is fully secured and locked into mounting brackets before operating
•
Always take a paddle and PFD with you on board
•
Never exceed a distance pedaling from which you are not willing to paddle back
•
Do not exceed the capacity limits
•
Do not operate the propeller if someone is in the water near the boat
•
Inspect the unit often for damage; do not use if damaged
•
Follow the recommended maintenance schedules
•
After use, always take the Helix PD out of the water
•
Do not operate the Helix PD deployment mechanism when not installed in a kayak
•
Do not disassemble the Helix PD unless give specific direction to do so by a Wilderness Systems customer service representative
•
If a different propulsion method is used (towing the boat, sailing, use of motor), the Helix PD must be removed or in the
stowed position
•
Follow local laws for the use of permissible mechanized means or registration of your kayak
In addition to these select warnings, please comply with the complete Owner's Manual. Also refer to the digital Owner's
Manual for service schedule and warranty information.
If you have any questions or problems with the asembly or parts included with your Helix PD, please contact us at (888) 525-
2925. Our Customer Service Staff is available to assist you from 9:00 A.M. to 5:00 P.M. (Eastern Time), Monday – Friday.
Please visit WildernessSystems.com for the complete Owner's Manual, instructional videos, and more.
#59504287
Wilderness Systems, 575 Mauldin Road, Suite 200, Greenville, SC 29607
Pedal Drive. The Helix PD is state-of-the-art in kayak
TM
Rev. 2/20/17
Publicidad
Resumen de contenidos para Wilderness Systems Helix PD Pedal Drive
- Página 1 Do not operate the Helix PD deployment mechanism when not installed in a kayak • Do not disassemble the Helix PD unless give specific direction to do so by a Wilderness Systems customer service representative • If a different propulsion method is used (towing the boat, sailing, use of motor), the Helix PD must be removed or in the stowed position •...
- Página 2 No utilice el mecanismo de despliegue de Helix PD cuando no esté instalado en un kayak • No desmonte el Helix PD a menos que el representante de servicio al cliente de Wilderness Systems le dé una instrucción específica •...
- Página 3 Ne faites pas fonctionner le mécanisme de déploiement Helix PD lorsqu’il n’est pas installé dans un kayak • Ne démontez pas la Helix PD, à moins qu’un représentant du service à la clientèle de Wilderness Systems ne vous donne des instructions spécifiques •...
- Página 4 • Nutzen Sie den Helix-PD- Freisetzungsmechanismus nicht, wenn das System nicht an einem Kayak angebracht ist • Bauen Sie den Helix PD nicht auseinander, sofern nicht eine konkrete Anweisung von einem Wilderness Systems Kundenbetreuer gegeben wurde • Wenn eine andere Antriebsmethode genutzt wird (Ziehen des Bootes, Segeln, Nutzung eines Motors), muss der Helix PD entfernt oder in die Staustellung gebracht werden •...
- Página 5 別の推進手段が使われている場合 (ボートの曳航、 セイリング、 モーターの使用) には、 Helix PDは取り外すか、 格納位置に 置く必要があります。 • カヤックに使用が認められた機構またはカヤックの登録については、 現地の法律に従ってください。 これら抜粋の注意事項に加えて、 完全版オーナーズ ・ マニュアルを順守してください。 また、 サービス ・ スケジュールおよび保証 情報につきましては、 デジタル ・ オーナーズ ・ マニュアルをご参照ください。 完全版オーナーズ ・ マニュアル、 取扱説明ビデオなどにつきましては、 WildernessSystems.comをご覧ください。 #59504287 Wilderness Systems, 575 Mauldin Road, Suite 200, Greenville, SC 29607 Rev. 2/20/17...
-
Página 6: Parts Overview
Crank Arm 18160026 1 Set (Left & Right) 18160027 (Left & Right) INDEPENDENT Crank Arm Bolt 30200010 Pedal 1 Set 18160031 (Left & Right) (Left & Right) #59504287 Wilderness Systems, 575 Mauldin Road, Suite 200, Greenville, SC 29607 Rev. 2/20/17... - Página 7 KIT B Rudder Hold-Down Strap 15440072 J- Hook 2FAS041 Cord Lock 30700078 ¼ x5/8” Neoprene Washer 59602000 5/8” Split Ring 2RUD01 10-32 x 5/16” Set Screw 30000054 #59504287 Wilderness Systems, 575 Mauldin Road, Suite 200, Greenville, SC 29607 Rev. 2/20/17...
- Página 8 TOOLS REQUIRED (Not Supplied) TOOL DESCRIPTION Phillips Screw Driver 8mm Allen Wrench 3/16” Allen Wrench 3/32” Allen Wrench 15mm Allen Wrench 3/8” Wrench Cordless Drill 7/32” Drill Bit (#21) #59504287 Wilderness Systems, 575 Mauldin Road, Suite 200, Greenville, SC 29607 Rev. 2/20/17...