Active forever SBB8 Guía De Instrucciones página 2

CORNER TEAK SPA BENCH
MODEL SBB8 Instructions For Use:
Easy to Assemble • Includes Teakwood Seat with:
• 5 predrilled screw holes
• 5 metal contoured washers
The Pollenex™ Corner Teak Spa Bench is partially assembled.
Final assembly can be completed in minutes. No tools are required.
Remove all parts from the box. Turn wooden bench seat upside down
on oor or table (Fig. A) .
With both U-shaped legs reaching up, place one leg on top of the
other. Indented centers should t together in an X-shape (Fig. B) .
Carefully align leg holes over predrilled bench holes. Place contoured
washer over center hole (Fig. C) .
Insert a plastic-capped screw through washer and screw loosely into
predrilled hole (Fig. D) .
Place a contoured washer over each of the remaining holes, and
securely screw the plastic-capped screws into place. Now tighten the
center plastic-capped screw (Fig. E) .
Adjust bench to desired height by pushing in adjustment pin on each
leg (Fig. F) , and moving leg up or down to allow pin to "lock" into
appropriate hole* (Fig. G) .
*NOTE: For safety and stability, be sure adjustment pins are securely
locked into holes at the same height on each leg.
• 5 plastic-capped screws
• 2 pre-assembled U-shaped legs
A
B
C
D
E
F
G
IB-8719A