Dreame V12 Manual Del Usuario página 13

How to Use
Cleaning Mode
There are two working methods for the vacuum, which can be selected based on your own
needs.
Method 1: Discontinuous Cleaning Mode
Press and hold the switch of the vacuum to enable this mode, and release it to stop
immediately.
Method 2: Continuous Cleaning Mode (Electronic Lock)
Click the electronic lock key to switch to Continuous Cleaning Mode, and then briefly press
the on/off switch to keep the vacuum in Continuous Cleaning Mode.
Use the electronic lock to free your finger from fatigue caused by holding the switch.
Continuous
Cleaning
Mode
Note:
• In this mode, briefly press the on/off switch to suspend the operation or start again and
the working mode of the vacuum will not change.
• Click the electronic lock again to quit Continuous Cleaning Mode.
EN
11