Lorell 75680 Instrucciones De Montaje

Instruction Manual
PARTS
PART
A, B, C
D
E
F
TO ASSEMBLE
1. Slowly raise the Top Bracket (A) to allow connection of the Support Segments (B) along the Support Cords (C),
forming the product's three Legs.
CAUTION: Keep all body parts clear of the Support Segments while they are connecting.
2. Position the product upright on a flat, stable surface, and pull the Legs outward to open them. (see Figure 1)
3. Attach the Support Brackets (D) to two Legs at a desired height, parallel to the floor and facing forward,
as shown in Figure 2.
a. Place the open end of one Support Bracket around a Leg.
b. Hold the Support Bracket into place and insert a Bolt (E) through both of the Bracket's Holes.
Screw a Wing Nut (F) onto the Bolt and tighten it.
CAUTION: Do not overtighten the Wing Nut.
c. Repeat Steps a – b to attach the other Support Bracket to the other Leg.
Leg
Figure 1
DESCRIPTION
Attached as one:
Top Bracket (A),
Support Segments (B),
Support Cords (C)
Support Bracket
Bolt
Wing Nut
A
B
B
B
Leg
Leg
Manufactured in China for S.P. Richards Co., Atlanta, GA
ILLUSTRATION
A
C
B
B
C
F
E
D
Figure 2
Folding Heavy Duty Easel
75680/75682
QTY
1
1
2
(2 extra)
2
(2 extra)
D