Hamilton Beach ALTURA 68168 Manual De Instrucciones página 8

Assembly – Hanging the Fan
4
Attaching the fan to the electrical
box
WARNING: T
other personal injury, mount the fan to an outlet box or
supporting system marked acceptable for fan support and
use the mounting screws provided with the outlet box.
Pass the 120-Volt supply wires through the center hole in
the mounting bracket (A).
Install the ceiling mounting bracket on the outlet box by
sliding the mounting bracket (A) over the two screws
provided with the outlet box. If necessary, use leveling
washers (not included) between the mounting bracket (A)
bracket (A) is toward the outlet box.
Securely tighten the two mounting screws.
5
Hanging the fan
Carefully lift the fan-motor assembly (D) up to the
mounting bracket (A).
Seat the hanger ball portion of the ball/downrod assembly
(B) in the mounting bracket socket. Ensure that the tab on
the mounting bracket (A) socket is properly seated in the
groove in the hanger ball.
A
8
A
B
D