Starting Operation; Working Advice - Bosch IXO Professional Manual Original

OBJ_BUCH-1384-005.book Page 16 Thursday, September 28, 2017 12:00 PM
16 | English
Operation

Starting Operation

Reversing the rotational direction
The rotational direction switch 8 is used to reverse the rotational direction
of the machine. However, this is not possible with the On/Off switch 7
actuated.
Right rotation: For driving in screws, push the rotational direction switch 8
left to the stop.
The indicator for right rotation 4 lights up when the On/Off switch 7
is actuated and the motor is running.
Left Rotation: For loosening or unscrewing screws, push the rotational di-
rection switch 8 right to the stop.
The indicator for left rotation 6 lights up when the On/Off switch 7
is actuated and the motor is running.
Switching On and Off
To start the machine, press the On/Off switch 7 and keep it pressed.
The power light 9 lights up when the On/Off switch 7 is slightly or completely
pressed, and allows the work area to be illuminated when lighting conditions
are insufficient.
To switch off the machine, release the On/Off switch 7.
Fully automatic spindle locking (Auto-lock)
The spindle is locked when the On/Off switch 7 is not pressed.
This enables screws to be screwed in, even when the battery is empty and
allows for the machine to be used as a screwdriver.
 When the spindle is locked, do not press the On/Off switch 7 for more
than 15 seconds. Otherwise the power tool can be damaged.

Working Advice

 Apply the power tool to the screw only when it is switched off.
Rotating tool inserts can slip off.
Up to 13 screwdriver bits can be stored on the side of the battery charger 11.
The fixture that holds the screwdriver bits can be removed.
1 609 92A 41K | (28.9.17) Bosch Power Tools