Makita DCL181F Manual De Instrucciones página 9

► 1 . Handle 2. Capsule
NOTE: Always remove dust ahead of time, as suction
power will be reduced if there is too much dust in
cleaner.
NOTE: Always be sure to check that both filter and
prefilter are loaded correctly prior to using cleaner.
If they are not loaded correctly, dust will get into the
motor housing, and cause motor failure.
If the following examples occur, filter and prefilter are
not loaded correctly. Reload them correctly to rectify
problem.
Problem Examples
Example 1: Only prefilter has been loaded (no filter)
► 1 . Prefilter
Example 2: Only filter has been loaded (no prefilter)
1
► 1 . Filter
1
1
Example 3: Filter has been loaded in a peeled back
state
2
► 1 . Filter
Example 4: Prefilter's securing lip is not firmly locked
into groove of cleaner housing
► 1 . Groove of cleaner housing 2. Prefilter 3. Securing
lip
Reassembly for high performance
filter
1. Connect high performance filter. At this time, make
sure to twist high performance filter so that securing lip
is firmly locked into cleaner unit.
► 1 . High performance filter 2. Securing lip
9 ENGLISH
1
1
1 2
3
2