Fermax iLOFT Manual De Instalador Y Usuario página 60

VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit VDS iLoft Kit
4.- Once these indicator tones have concluded, or before they conclude, press any button on
the panel, with one press for each second to be programmed (from 1 to 99 seconds).from
the residence or following the indicator tones), wait 5 seconds before taking any other
action.
To programme the lock-release time from the exit button, while in time programming
mode, (having finished programming the lock-release time from the residence or
following the indicator tones), wait 5 seconds before taking any other action.
5.- At this time a new confirmation tone will sound indicating the change to entrance hall
lock-release programming mode, then subsequently emitting the aforementioned
beeps detailing the time programmed.
6.- Once the current time indicator tones have concluded, or before they conclude, press
any button on the panel, with one press for each second to be programmed (from 1 to
99 seconds).
To exit programming mode, wait 5 seconds without pressing any key. A "MUOK" sound will
be emitted indicating that you have exited time programming mode.
If you enter time programming mode and do not press any key, this mode will automatically
be exited after 30 seconds.
Pag 26