Symbols Used In The Manual - Crown CT23007HX Manual Original

Safety warnings specific for grinders
• Check that speed marked on the wheel is equal
to or about of the rated speed of the grinder.
• Ensure that the wheel dimensions are compat-
ible with the grinder.
• Abrasive wheels shall be stored and handed
with care in accordance with manufacturer's in-
structions.
• Inspect the grinding wheel before use, do not
use chipped, cracked or otherwise defective prod-
ucts.
• Ensure that mounted wheels and points are fit-
ted in accordance with the manufacturer's instruc-
tions.
• Ensure that the abrasive product is correctly
mounted and tightened before use and run the tool
at no-load for 30's in a safe position, stop immedi-
ately if there are considerable vibrations or other
defects are detected. If this condition occures, check
the power tool to determine the causation�
• Do not use it cutting off steel for side grinding.
• Ensure that ventilation opening clear when
working in dusty condition. If it is necessary to clear
the dust make sure that the Switch off the grinder and
disconnect it away the power point�

Symbols used in the manual

Following symbols are used in the operation manual,
please remember their meanings� Correct interpreta-
tion of the symbols will allow correct and safe use of
the power tool�
Symbol Meaning
Cordless straight grinder
Sections marked gray - soft
grip (with insulated surface)�
Serial number sticker:
CT ��� - model;
XX - date of manufacture;
XXXXXXX - serial number�
Brushless motor�
Read all safety regulations
and instructions�
Wear safety goggles�
Wear a dust mask�
Symbol
min
III
English
22
Meaning
Do not heat the battery
above 45°C� Protect from
prolonged exposure to direct
sunlight�
Do not dispose of the battery
in a domestic waste con-
tainer�
Do not dispose of the battery
in the fire.
Protect the battery from the
rain�
Battery charging time�
Movement direction�
Rotation direction�
Locked�
Unlocked�
Protection class�
Attention� Important�
A sign certifying that the
product complies with es-
sential requirements of the
EU directives and harmo-
nized EU standards�
Useful information�
Do not dispose of the power
tool in a domestic waste
container�