Kohler K-T18488 Guia De Instalacion página 5

2. Install the Showerhead Assembly
CAUTION: Risk of product damage. To avoid clogging the
showerhead spray outlets, use thread sealant tape on the pipe
nipple. Do not use thread sealant compound (pipe dope).
Remove the temporary nipple from the shower elbow.
Apply thread sealant and install a 1/2" NPT nipple to extend 1"
(2.5 cm) beyond the finished wall.
Turn the main water supply on.
Run water through the pipe nipple to flush out dirt and debris.
Place the wall flange onto the pipe nipple and flush against the
wall.
Apply thread sealant tape to the pipe nipple, then thread the
showerhead assembly onto the pipe nipple.
Carefully tighten the showerhead assembly to the pipe nipple
with a clean strap wrench.
Kohler Co.
Shower Elbow
Pipe Nipple
Wall Flange
Showerhead
Assembly
5 1054205-2-B