USING & ASSEMBLING THE STRAP (OPTIONAL)
This appliance is designed to be conveniently carried on
your waist using the belt-strap accessory.
When cleaning steps, curtains, shelves, etc, you can
carry the unit with the strap over your shoulder.
Ready for use
1) Insert the lockers into the holes on the cleaner, taking
care of the lockers' direction.
*Strap-ends should face the body of the cleaner.
2) Pull the lockers to the front of the cleaner until they
click into place.
3) Adjust the strap length to fit your body.
When not using the strap
- Detach the lockers by pushing them down and drawing
them out from the unit.
- Keep the strap separately for the next time you want to
use it.
CYCLONIC FILTER (ONLY CYCLONIC FILTER TYPES)
You can use a dust bag in your cleaner for a long time thanks to the Cyclonic Filter system and it
maintain the maximum cleaning efficiency.
The larger particle of dust filtered from Cyclonic Filter remain in Dust Barrel when suctioned air and
dust revolves in the Cyclonic Filter. So the dust bag contains only smaller ones.
When the Dust Barrel is filled with dust up to the indicating line, it needs disposing and cleaning.
Dust Barrel can be cleaned in water.
1. Turn the Dust Barrel to the left and pull it.
2. Disconnect the Cyclonic Filter from extension wand and handle.
3. Remove thread and hair tangled around the net.
4. After cleaning the Dust Barrel and Cyclonic Filter,connect the Cyclonic Filter with extension wand
and handle(washed part should be dried in the shade throughly before assembling).
5. Push and turn the Dust Barrel to the right.
Adjust indicating marks each other carved on Dust Barrel and Cyclonic Filter.
CYCLONIC
FILTER
DUST BARREL
CREVICE TOOL
EN-5
1)
*
Locker
2)
3)