en
1.
3.
5.
7.
2.
4.
6.
4!x
1.! Open the brewing unit by lifting the
handle (4a) and then pushing the
brewing unit up.
2.! Place the Service T DISC (6a) on the
T DISC holder (4b) with the barcode
facing down.
Make sure that the flap of the T DISC is
centred in the slot in the front.
3.! Close the brewing unit by first bringing
it down.
4.! Then push the handle (4a) firmly to the
machine, until you hear an audible click.
5.! Press the Start / Stop button (2) to start
the cleaning process.
6.! When the cleaning process is complete,
empty the cup and return it under the
drink outlet.
! ! Important:
Please!complete!steps!5!and!6!four!
times!to!ensure!the!machine!is!
cleaned!and!prepared!for!the!next!
steps.
7.! Open the brewing unit, remove the
Service T DISC and store it in the
compartment (6) at the back of the
machine.
The next step involves installing the
►
BRITA MAXTRA water filter system that
came with your machine. Please follow
the instructions on the next pages.
23
03/2013