Wet Vacuum Operation - Uline VACMASTER H-9461 Manual Del Usuario

DRY VACUUM OPERATION
1. Insert the locking end of the
hose into the vacuum port and
lock in place. Push the required
attachment onto the free end of
the hose or extension.
(See Figure 20)
2. Plug the power cord into the
outlet. (See Figure 21)
BEFORE VACUUMING
WARNING! Do not vacuum in areas with
flammable gases, vapors or explosive dusts
in the air. Flammable gases or vapors include,
but are not limited to, lighter fluid, solvent type
cleaners, oil-based paints, gasoline, alcohol or
aerosol sprays. Explosive dusts include, but are
not limited to, coal, magnesium, grain or gun
powder. To reduce the risk of health hazards
from vapors or dust, do not vacuum toxic
materials.
1. Verify that the power cord is
disconnected from the outlet.
(See Figure 23) Ensure the
collection tank is clean and
free from dust and dirt.
2. Remove cartridge filter and
collection bag (if present), then
carefully install the foam wet filter
over the filter cage and place
the power head back on the
collection tank. (See Figure 24)
NOTE: Do not use the
cartridge filter or dust bag
for liquid vacuuming.
PAGE 6 OF 30
DRY VACUUM OPERATION CONTINUED
Figure 20
Figure 21
LIQUID VACUUM OPERATION
Figure 23
Figure 24
3. Turn the motor on by flipping the
switch to the on position.
(See Figure 22)
4. Once vacuuming is completed,
flip the switch to the off position
and unplug the power cord from
the outlet.
WARNING! Do not use the cartridge filter or dust
bag for liquid vacuuming.
3. Fit the desired nozzle to the
vacuum hose. (See Figure 25)
4. Verify that the switch is in the off
position before plugging the
power cord into the outlet.
(See Figure 26)

WET VACUUM OPERATION

1. Turn the motor on by flipping the
switch to the on position.
(See Figure 27)
2. Once vacuuming is completed,
flip the switch to the off position
and unplug the power cord from
the outlet. Empty the collection
tank into a suitable receptacle
or drain. (See Figure 28)
Figure 22
Figure 25
Figure 26
Figure 27
Figure 28
0821 IH-9461