Symbol WSS 1000 Guía Rápida página 15

Communicating with the Host
Using the Cradle
The CS 1000 cradle is used to perform communications
with a host PC. To set up the cradle for operation:
1. Plug one end of a null modem cable (p/n 59846-03-
00) into the communications port located on the left
end of the cradle.
2. Connect the other end of the cable to the host
computer's serial (COMM) port.
3. Provide power to the cradle by plugging the power
supply's round connector into the power port on the
cradle and the other end of the power cable in an
electrical outlet.
4. Insert the WWC 1000 in the cradle (the ring scanner
can be attached).
5. Start the communications program as detailed in the
WSS 1000 Product Reference Guide.
Radio Communications
Wireless communication with the host is available through
the Spectrum One
performing radio communications, refer to the WSS 1000
Product Reference Guide.
®
radio network. For information on
13