Cequent Towing Products ROLA 59600 Guia De Inicio Rapido página 2

Please read all instructions carefully before assembly, installation and/or use of this product.
1
6 mm x 90 mm
long screw
Hex wrench
2
3
Cequent Towing Products - Plymouth, MI
Technical Service: (888) 521-0510
Product Name:
Product Code:
ASSEMBLE SKI CARRIER
Ski carrier
•
•
Top mounting clamp
ATTACH SKI CARRIER
• To attach ski carrier to vehicle cross-bar, place ski
carrier on top of cross-bar and install the bottom
clamp around bottom of cross-bar and secure with
the 6 mm x 40 mm long screws.
• Center the ski carrier and tighten screws using the
4 mm hex wrench provided.
• Adjust cross-bars to fit skis or snowboards.
(30" approximately).
30" approx.
LOADING SKIS OR SNOWBOARDS TO CARRIER
•
•
•
Page 2
Roof Top Ski Carrier
59600
Attach the top mounting clamp to the ski carrier
with the 6 mm x 90 mm long screws.
Tighten screws using the 5 mm hex wrench
provided.
1.00"
MAX.
CROSS-BAR
SIDE VIEW OF MOUNTING CLAMP
Open ski carrier and load skis into carrier with tips
facing to the rear.
See step 4 for mounting options
To close the carrier, push the hood down firmly
until it engages the latch.
Use key to lock both ski carrier hoods.
www.rolaproducts.com
59600N
MINIMUM 3 THREADS
PAST HEX NUT
Rev B 0807