JBL ON TIME 200ID Manual De Instrucciones página 14

14 14 JBL ON TIME 200
0024CSK - JBLOnTime200iD v12.indd 14 0024CSK - JBLOnTime200iD v12.indd 14
TROUBLESHOOTING
CHARGING AND SYNCING
Symptom Possible Problem
iPod will not charge Wrong adapter is used
The iPod is not making full contact with
the docking station
iPod is not recognized by the Third-party accessories may be confl ict-
computer when docked into ing with the USB signal
™
the JBL On Time 200ID unit,
or there is an error in data
transfer
USB port is not supplying enough power
CLOCK SET AND CLOCK MEMORY
Symptom Possible Problem
Clock is not set to correct time Incomplete setup
JBL On Time 200ID unit does There are no batteries installed in
not retain memory settings the unit
when there is a power outage,
or if the unit is unplugged Batteries may be low
D USER GUIDE
I
Solution Note
Make sure correct adapter is used for your specifi c
iPod model.
Make sure the iPod is seated securely into the
docking station.
Make sure you do not have the JBL On Time 200ID
unit connected to a USB hub; connect the unit
directly into the computer's USB port.
Try connecting the USB cable to another port on the
back of the computer.
Solution Note
Be sure to follow the clock setting procedure
through, to the end. A confi rmation screen will be
displayed when set completely.
Make sure you install three AAA batteries in the
base of the JBL On Time 200ID unit.
If you have installed three AAA batteries, replace
them, as they may be defective.
04/09/08 16:27:02 04/09/08 16:27:02