Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT SAFETY PRECAUTIONS
Please read all safety information before using
this product.
1. Use fan only as described in this manual.
Other use is not recommended and may
cause fire, electric shock or injury.
2. This fan is intended for household use only
and not for commercial or industrial use.
3. Be sure fan is mounted onto a secure
structure.
4. Unplug fan when moving it from one location
to another, before putting on or taking off
parts (such as the safety grill), and before
cleaning.
5. To protect against electric shock, do not
immerse unit, put plug or cord in water or
spray with liquids.
6. Do not use outdoors or in window. Rain may
create electrical hazard.
7. Do not place fan or parts near an open
flame, cooking or other heating appliance.
8. Do not operate without fan grill in place.
9. Avoid contact with moving parts. Never
insert fingers, pencils or any other object
through the guard when fan is running.
10. Close supervision is necessary when any
appliance is used by or near children.
11. The use of attachment not recommended by
manufacturer may be hazardous.
12. Do not operate fan with a damaged cord or
plug, or after the fan malfunctions or has
been dropped or damaged in any manner.
Discard fan or return to an authorized service
facility for examination and/or repair.
13. Do not let cord hang over the edge of a table
or counter, or let it touch any hot surfaces.
14. Do not run cord under carpeting. Do not
cover cord with throw rugs, runners, or
similar coverings. Do not route cord under
furniture or appliances. Arrange cord away
from traffic area, where it will not be tripped
over.
15. To disconnect, grip plug and pull from wall
outlet. Never yank cord.
16. This fan has a polarized plug (one blade is
wider than the other). To reduce the risk of
electric shock, this plug is intended to fit in
2
www.Hydrofarm.com
INSTRUCTIONS
a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified
electrician. DO NOT attempt to defeat this
safety feature.
17. This product employs an overload protection
fuse. A blown fuse indicates an overload
or short-circuit situation. If the fuse blows,
unplug the product from the outlet. Replace
the fuse as per the user servicing instructions
below. Follow product marking for proper
fuse rating and check the product. If the
replacement fuse blows, a short-circuit
may be present and the product should
be discarded or returned to an authorized
service facility for examination and/or repair.
18. RISK OF FIRE: Do not replace power supply
plug—it contains a safety device (fuse) that
should not be removed. Discard product if
the plug is damaged.
WARNING: To reduce the risk of fire or
electrical hazard, do not use this fan with any
solid state speed control device.
Unplug or disconnect this fan from the
power supply before servicing.
ASSEMBLY INSTRUCTIONS
1. Unscrew the plastic nut on the front of the
motor case by turning counterclockwise.
2. Mount the rear grill to the front of the motor
cover by matching 2 holes on the grill to the
2 round knobs on the cover. Push in firmly
until the 2 knobs protrude through the 2
holes.
3. Tighten the rear grill with the nut, making
sure that the nut is screwed in far enough so
that the rear grill is flush with the outside of
the motor housing cylinder.
4. Put the fan blade onto the motor shaft by
matching the slots of the blade. Tighten
the blade with the blade cap by turning it
counterclockwise.
5. Test fan by rotating with your hands. Make
sure there is no contact with the nut. The
fan blade should rotate freely. If it doesn't,
remove the blade and repeat steps 3-5.
6. Mount front grill onto rear grill by using the
grill support band. Cover both front and rear
Publicidad
