Publicidad
GB
Parts List:
Prior to starting the assembly, please ensure all parts are present:
chassis 1 x (fig. 1), rear axle 1 x (fig. 2), rear wheels 2 x (fig. 3), front wheels 2 x
(fig. 4), seat 1 x (fig. 5), safety bar 1 x (fig. 6), roof 1 x (fig. 7).
Setup:
Open the safety latch. In order to unfold the chassis, pull the handle upward (fig. 1)
until you hear it click into place (fig. 8).
Affix the rear axle to the chassis (fig. 9). Check if the axle is firmly connected by
pulling on it. To take the axle off, press the release buttons and pull the axle off the
frame (fig. 10).
Press the button in the centre of the rear wheels and affix them to the rear axle until
you hear them click into place (fig. 11). To remove the rear wheels press the button
in the rear wheel's centre and pull it off the axle (fig. 11).
In order to affix the front wheels, press the button and press them to the wheel
suspension until you hear them click into place (fig. 12). To remove the front wheels
press the release button and pull them downward (fig. 12).
Put the seat unit into both notches on the chassis until you hear it click into place
(fig. 14). Check if the seat is firmly connected by gently pulling it upward. The seat
can be affix facing in both directions. In order to remove the seat, press both release
buttons and take the seat off the frame (fig. 15).
Safety bar:
In order to assemble the safety bar, put it into the two notches provided for this
purpose at the seat (fig. 17). To remove the bar, press the closing mechanism on the
bar's bracket and pull the bar out (fig. 18).
Affixing the roof:
Place both of the roof's plastic clips into the plastic rails provided on both sides of
the stroller (fig. 19). Check if the roof has correctly clicked into place by pulling it
upward (fig. 20). Use the zipper to connect roof and seat cover with each other (fig.
21).
PLEASE NOTE: Always ensure to fold the roof first before you fold up the stroller.
Swivel wheel function:
In order to activate the swivel wheel function, push the button provided on the front
wheels downward. In order to fix the front wheels, push this button upward (fig. 13).
Publicidad
