Care And Maintenance - cam SONNO L117 Manual De Instrucciones

Ocultar thumbs

página de 16

/ 16
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

INSTRUCTIONS FOR SAFE USE

IMPORTANT: READ THESE INSTRUCTIONS

CAREFULLY AND RETAIN THEM

FOR FUTURE USE.

WARNING:

ATTENTION! Any mistake in following these instructions could case serious danger or even dead for

suffocation. The safety of the child could be compromised if the present instructions should not be

respected. WARNING: the producer CAM IL MONDO DEL BAMBINO S.p.A reserves all the rights to amend

the product for technical or commercial reasons. IMPORTANT: Always use the product as it has been

designed; on the contrary the producer will not be held responsible. WARNING: Do not use the cot if any

part is broken, torn or missing and use only spare parts approved by the manufacturer. WARNING: Do

not use the cot when the child is able to climb out to prevent the risk of falling. WARNING: Be aware of

the risk of open fire and other sources of strong heat, such as electric bar fires, gas fires, etc. in the near

vicinity of the cot. WARNING: Do not leave anything in the cot or place the cot close to another product,

which could provide a foothold or present a danger of suffocation or strangulation ,e.g. strings,

blind/curtain cords, etc. WARNING: A travel cot can be used only after the user has checked that all the

folding/locking mechanisms are correctly working. WARNING: Check carefully that all the assembling

parts are completely locked before using the cot! WARNING: Check regularly that the assembling parts

(screws and figs) are well tightened and lock them again if necessary. WARNING: Never leave your child

unattended in the travel cot ,especially when he is not sleeping. WARNING: While assembling the product,

do not place the fingers near the plastic corners of the travel cot as you can get hurt. WARNING: Do not

use more than one mattress in the cot. The mattress dimensions are 1180x600x200 mm (length, width,

depth). ATTENTION: The distance between the mattress and the extremity/sides of the cot should never

be more than 30 mm. WARNING: Never use a different mattress than the one supplied with the travel

cot, and in any case the mattress cannot be thicker than 80 mm. The red mark shows the maximum

thickness of the mattress. Do never remove the mattress supplied by the producer.

ASSEMBLY INSTRUCTIONS

1. Put the travel cot vertically and open the velcro fasteners around it.

2. Take the edges on both the short sides of the travel cot and bring them upward.

3. Open the travel cot while keeping the central part of it lifted up thanks to the handle placed

on the bottom and at the same time raise the 4 edges till the travel cot is completely fitted.

4. Once the 4 edges are locked, push the central part of the travel cot's bottom downwards.

5. Insert the mattress on the travel cot's bottom.

6. Disengage the hooks placed outside the mattress (A) and make them pass through the relevant

holes on the travel cot's bottom (B) and then fix them. Act in the same way on both sides.

FOLDING THE CAMPING COT

7. Fold the travel cot keeping the central part of the bottom lifted up and lowering the 4 sides.

ATTENTION! Carefully check the sequence in fig. 1-2-3; lift the first sides; push the button

inside; then lower the side.

8. Pull up the central handle on the bottom so that the travel cot is well gathered towards the inside.

9. Close the travel cot in a compact way and place the mattress all around it, locking it with the

velcro fasteners as shown in the figure.

10. Place the carrying bag on the high part of the travel cot and put the travel cot itself and all

the accessories inside, and then close it with the zip.