Publicidad
Idiomas disponibles
Idiomas disponibles
FLUSH WALL INSTALLATION
Measure the distance between the keyholes on
the end caps and mark these locations on the wall.
Measure the diameter of the keyhole (the head of
the fixing screws should be smaller than this - sizes
vary between models).
NOTE: Upon opening this product,
there may be a slight odour. This is due
to the chemical treatment required to
achieve a true white material. Every care
is taken during manufacturing to air out
the product, however, should the smell
remain, please leave in the open position
for 24-48 hours in a well-ventilated area.
Drill holes in the locations previously marked and
insert plastic anchors (if required), followed by the
appropriate screw.
NOTE:
Hook the Screen
Housing onto
the exposed
screws and
tighten to
secure.
Leave 3-4mm of the screw exposed in order
to mount the Screen Housing.
CEILING INSTALLATION
Drill holes and insert plastic anchors (if required).
Fix the Screen Housing in place with 4 screws as
shown (not included).
EN
Publicidad
