TEFAL TD1000K0 Manual Del Usuario página 20

FR
Night light function –
NL
This function is optional. To use it, press button
night light, which switches off and on automatically when the
transmitter detects a sound.
DE
To turn off this function, press button
IT
Caution: to operate, the
EN
transmitter and the receiver
must be set on the same
ES
channel.
PT
EL
TR
RU
UK
PL
CS
SK
HU
BG
Maintenance
RO
Clean with a slightly damp cloth without detergents.
Do not let water get inside the appliances.
HR
KZ
20
fig. F
:
3
again.
It is portable. Clip
Starting up:
To start the receiver, select channel A or B using button
Adjust the volume with button
– if indicator lamps
monitoring.
– if the red indicator lamps
– if the receiver beeps, the transmitter signal been lost (it is switched
off, on the wrong channel or out of range).
– if the recharging indicator lamp
Place the receiver on its recharging base.
The baby monitor transmits the sound from the room where the baby
is. If there is no sound, the appliance goes into monitor mode. When
a sound is detected, it is transmitted and the red indicator lamps for
sound level light up. Their number is proportional to the intensity of
the sound transmitted. The transmitter waits for a minimum sound
threshold before transmitting.
If you want to switch the sound off and just use the visual alarm: lower
the sound level to the minimum with the volume adjustment
Turn switch
appliance off.
3
: this turns on the
7
can be used to attach it to your belt, for example.
11
.
5 10
and light up steadily, the appliance is
9
light up, the receiver is detecting sound.
5
4
to OFF on the transmitter and on the receiver to turn the
Receiver
4 – fig. E
is red, the batteries are low.
.
11
.