Environmental Protection; Important; Declaration Of Conformity - Worx WG505E Manual Original

ENVIRONMENTAL
PROTECTION
Waste electrical products must not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or retailer for
recycling advice.
PLUG REPLACEMENT
(UK & IRELAND ONLY)
If you need to replace the fitted plug then
follow the instructions below.

IMPORTANT

The wires in the mains lead are colored in
accordance with the following code:
Blue = Neutral
Brown = Live
As the colors of the wires in the mains lead of
this appliance may not correspond with the
coloured markings identifying the terminals
in your plug, proceed as follows. The wire
which is coloured blue must be connected to
the terminal which is marked with N. The wire
which is coloured brown must be connected
to the terminal which is marked with L.
WARNING! Never connect live or
neutral wires to the earth terminal of the
plug. Only fit an approved BS1363/A plug and
the correct rated fuse.
NOTE: If a moulded plug is fitted and has to
be removed take great care in disposing of the
plug and severed cable, it must be destroyed
to prevent engaging into a socket.
All-in-One Blower/Vac/Mulcher
DECLARATION OF
CONFORMITY
We,
POSITEC Germany GmbH
Konrad-Adenauer-Ufer 37
50668 Köln
Declare that the product,
Description Electric Blower Vacuum
Type WG505E(5-designation of
machinery, representative of Electric
Blower Vacuum)
Function Blowing and picking up debris
into a debris collector
Complies with the following Directives,
2006/42/EC,
2004/108/EC,
2011/65/EU,
2000/14/EC amended by 2005/88/EC
2000/14/EC amended by 2005/88/EC:
- Conformity Assessment Procedure as per
Annex V
- Measured Sound Power Level 106.7dB(A)
- Declared Guaranteed Sound Power Level
110dB(A)
Standards conform to
EN 60335-1
EN 15503
EN 62233
EN 55014-2
EN 61000-3-3
The person authorized to compile the
technical file,
Name: Russell Nicholson
Address: Positec Power Tools (Europe)
Ltd, PO Box 152,Leeds,LS10 9DS,UK
Suzhou 2015/01/12
Allen Ding
Deputy Chief Engineer, Testing & Certification
IEC 60335-2-100
EN ISO 3744
EN 55014-1
EN 61000-3-2
EN
13