J6 - Serial - Agilent Technologies TV70 Manual De Instrucciones

18
Technical Information
Interconnections
How to connect the outputs of the controller
The following figure shows a typical logic output connection (relay
coil) but any other device may be connected e.g. a LED, a computer,
etc., and the related simplified circuit of the controller. The figure
example refers to the programmable set point signal on pins 11
and 9.
Figure 12 Typical output connection
J6 – Serial
Figure 13
This is a 9 pin D-type serial input/output connector to control via an
RS 232 or RS 485 connection the TV70 Navigator.
Controller TV70 Navigator User Manual / 87-900-956-01 (G) 163/182