Panasonic EH-NA65 Instrucciones De Operación página 7

Ocultar thumbs Ver también para EH-NA65:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 73
WARNING
Disconnect the plug by holding onto it instead of
pulling on the cord.
- Failure to do so may cause the wire in the cord to
break, and may cause burn, electric shock, or fi re due
to a short circuit.
Regularly clean the plug to prevent dust from
accumulating.
- Failure to do so may cause fi re due to insulation failure
caused by humidity.
Disconnect the plug and wipe with a dry cloth.
Always turn off the power switch and disconnect
the plug from the household outlet after use.
- Failure to do so may cause fi re or burn.
Insert the plug into the household outlet directly:
Do not use with an extension cord.
Fully insert the plug.
Always ensure the appliance is operated on an
electric power source matched to the rated voltage
indicated on the appliance.
- Failure to do so may cause fi re or electric shock.
EH-NA65_EU.indb 7
EH-NA65_EU.indb 7
►In case of an abnormality or malfunction
Immediately stop using and remove the plug if there
is any abnormality or malfunction.
- Failure to do so may cause fi re, electric shock, or
injury.
<Abnormality or malfunction cases>
• Air is not emitted
• Unit stops sporadically
• Interior becomes red hot and smoke is emitted
- Immediately request inspection or repair at an
authorized service center.
►Maintenance
When you see sparks around the air outlet while
using the hot air setting, stop use and remove the
lint on the air outlet and air inlet.
- Failure to do so may cause burn or fi re.
►This appliance
Do not block or insert hair pins or other foreign
objects into the air inlet, air outlet or nanoe™ outlet.
- Doing so may cause fi re, electric shock, or burn.
7
17/10/2562 11:02:49
17/10/2562 11:02:49

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido