English - Xindao P239.572 Manual Del Usuario

ENGLISH

Congratulations with your automatic tire pump! Please read this
manual carefully before use.
1. LCD display
2. UNIT button
3. Power button
4. - & + button
5. Charging port
6. Storage hole
7. LED light
8. Vent port
How to inflAte sport bAlls, bike tyres And motorcycle:
1. Connect one end of the air tube to the inflator and connect the
other end to tire valve. NOTE: For French valve, please install
the valve converter first before use. For cars, it is recommended
to use the cigarette lighter for power supply.
2. Press the UNIT button (2) to activate the inflator. The LCD
screen (1) will display current pressure.
3. Press the UNIT button (2) to switch units between PSI \ BAR \
KPA \ kgf/cm2. The recommended range of pressure can be
found on tire in general.
4. The + button and – button (4) are preset buttons for adjusting
target pressure. Press the button or hold the button to adjust
the target pressure. The target pressure will be locked after the
number flickered for 4 seconds on the LCD (1). The target
pressure can be locked as well immediately by pressing the
UNIT button (2).
4.
6.
7.
8.
1.
2.
3.
5.