Publicidad
Idiomas disponibles
Idiomas disponibles
When the room temperature reaches the preset temperature, the appliance will maintain
the air temperature by cycling on and off.
To achieve the ideal temperature during use:
-
First turn the indicator to the maximum position (clockwise until the knob stops)
-
Once the desired comfort/temperature level is reached, lower the temperature
setting until the fan heater stops operating.
-
The appliance will now maintain a constant temperature.
AUTO SAFETY SHUT-OFF IN CASE OF OVERHEATING
In order to avoid damage and risk resulting from overheating, the appliance is equipped
with an auto safety shut-off. Should the appliance overheat, it automatically shuts off.
If this occurs:
-
Turn the adjustment knob to "0"
-
Pull out the plug.
-
Let cool for 5-10 minutes
-
Switch it on again
DAILY MAINTENANCE
1.
Turn the adjustment knob to "0" and turn off the power.
2.
Pull out the plug
3.
Let cool for 5-10 minutes.
4.
To clean, use clean water and a mild detergent. Do not splash water into the
appliance.
5.
To prevent fading and damage to its appearance, do not rub with gasoline, acid
or alkali.
6.
To store, the appliance should be cooled and place in the box in a dry, ventilated
location.
TROUBLESHOOTING
If the fan fails to heat up after being switched on:
1.
Inspect the plug for damage.
2.
Ensure the constant temperature knob is adjusted to the max position (clockwise
toward the bottom).
3.
Ensure the adjustment knob is switched on.
EC-Declaration of Conformity
The unit complies with the essential health and safety requirements of the
European Union. The EC declaration of conformity is the basis for the CE
marking of this unit.
With the publication of this manual, all previous are not valid. SUNTEC,
SUNTEC Wellness, KLIAMTRONIC and the Sun logo are registered
trademarks. © 2016/02 SUNTEC WELLNESS GMBH
Publicidad
